Walk-Behind Trencher
Barreto 912HM Walk-Behind Trencher
A compact hydraulic self-propelled walk-behind trencher with a Honda gas engine, for irrigation, low-voltage and small utility trenches up to about 24 in deep.
Barreto 912HM specifications
- Operating weight
- 620 lb
- Dig depth
- 12, 18 or 24 in (boom options)
- Chain width
- 4 or 6 in
- Width
- 29 in
- Height
- 43 in
- Length
- 81 in boom end to handlebar; 71 in front wheel to handlebar
- Wheelbase
- 30 in
- Engine
- Honda GX270 (gasoline)
- Hydraulic reservoir
- 9.5 gal
- Travel speed
- 132 ft/min forward; 58 ft/min reverse (variable)
From the manufacturer’s published specifications. Check the machine’s decals for its exact ratings.
Daily care
Hydraulic fluid should show about halfway up the sight glass; top up with AW/ISO 68 hydraulic oil (AW/ISO 46 below 32°F). Replace the hydraulic filter after the first 50 hours on a new machine, then every 200 hours, adding one quart of hydraulic fluid with each filter change. The free-wheeling hubs let you move it without starting the engine.
Barreto 912HM at Versi Rentals
Rent by the day, week, or month from our Springville yard, with delivery throughout Utah.
Barreto 912HM maintenance schedule
The manufacturer’s preventive maintenance intervals, whichever comes first of hours or time. Every machine in our fleet is kept on this schedule.
- Hydraulic filter, first change (new machine)Once, after the first 50 hours
- Hydraulic filterEvery 200 hours
Barreto 912HM questions
How wide is the Barreto 912HM?
The Barreto 912HM is 29 in wide.
How much does the Barreto 912HM weigh?
The Barreto 912HM weighs 620 lb, which matters for trailers, floors, and elevators.
What daily care does the Barreto 912HM need?
Hydraulic fluid should show about halfway up the sight glass; top up with AW/ISO 68 hydraulic oil (AW/ISO 46 below 32°F). Replace the hydraulic filter after the first 50 hours on a new machine, then every 200 hours, adding one quart of hydraulic fluid with each filter change. The free-wheeling hubs let you move it without starting the engine.
How often does the Barreto 912HM need service?
Following the manufacturer's schedule: hydraulic filter (every 200 hours). We keep every machine in our fleet on this schedule.
Where can I find the Barreto 912HM operator's manual?
The Barreto 912HM operator's manual is linked on this page, along with the other manufacturer documents we keep for it.
Where can I rent a Barreto 912HM in Utah?
Versi Rentals rents the Barreto 912HM from our yard in Springville, Utah, with delivery throughout Utah. Call (801) 880-8800 or see the listings on this page.