Electric Scissor Lift
Genie GS-1932 Electric Scissor Lift
A 19 ft platform-height (25 ft 3 in indoor working height) electric slab scissor lift with AC electric drive, 32 in wide, with non-marking tires and a roll-out extension deck.
Genie GS-1932 specifications
- Working height
- 25 ft 3 in indoor; 20 ft 8 in outdoor
- Platform height
- 19 ft 3 in indoor; 14 ft 8 in outdoor
- Platform capacity
- 500 lb (250 lb on extension deck); 2 occupants indoor / 1 outdoor
- Platform size
- 5 ft 5 in x 29.9 in outside; 8 ft 5 in with 3 ft extension
- Stowed width
- 32.2 in
- Stowed height
- 7 ft 1 in (folding rails up); 5 ft 11 in rails lowered
- Machine weight
- 2,929 lb
- Drive speed
- 2.5 mph stowed; 0.5 mph raised
- Gradeability
- 25%
- Indoor / outdoor use
- Indoor and outdoor (lower outdoor height rating)
- Power
- 24V DC: 4 x 6V 210Ah flooded lead-acid, or 1 x 24V 90Ah lithium-ion
From the manufacturer’s published specifications. Check the machine’s decals for its exact ratings.
Daily care
Do the pre-operation inspection and function tests before each work shift. Charge with the onboard Genie charger in a well-ventilated area. Flooded batteries: add distilled water only to cover the plates before charging, then top up to the bottom of the fill tube after the charge. Lithium-ion units need no watering. Check the hydraulic oil level daily with the platform stowed.
Genie GS-1932 at Versi Rentals
For sale from our yard, with shipping nationwide.
Genie GS-1932 maintenance schedule
The manufacturer’s preventive maintenance intervals, whichever comes first of hours or time. Every machine in our fleet is kept on this schedule.
- Pre-operation inspection and function testsBefore each work shift
- Charge batteries and check battery waterAfter use, until the charger shows a full charge
- 50-hour commissioning service (one time)Once, after the first 50 hours
- 150-hour commissioning service (one time)Once, after the first 150 hours
- Frequent (quarterly) inspectionEvery 150 hours or 3 months
- Annual inspectionEvery year
- Replace drive hub oilEvery 200 hours
- Grease steer yokes (earlier E-Drive serials only)Every 100 hours
- Replace hydraulic filtersEvery 2,000 hours
- Test or replace hydraulic oilEvery 2,000 hours
- Check scissor arm wear padsEvery 2,000 hours
Genie GS-1932 questions
How high does the Genie GS-1932 reach?
The Genie GS-1932 has a working height of 25 ft 3 in indoor; 20 ft 8 in outdoor and a platform height of 19 ft 3 in indoor; 14 ft 8 in outdoor.
How much weight can the Genie GS-1932 lift?
The Genie GS-1932 is rated for 500 lb (250 lb on extension deck); 2 occupants indoor / 1 outdoor.
How wide is the Genie GS-1932?
The Genie GS-1932 is 32.2 in wide when stowed.
How much does the Genie GS-1932 weigh?
The Genie GS-1932 weighs 2,929 lb, which matters for trailers, floors, and elevators.
How do I charge and care for the Genie GS-1932?
Do the pre-operation inspection and function tests before each work shift. Charge with the onboard Genie charger in a well-ventilated area. Flooded batteries: add distilled water only to cover the plates before charging, then top up to the bottom of the fill tube after the charge. Lithium-ion units need no watering. Check the hydraulic oil level daily with the platform stowed.
How often does the Genie GS-1932 need service?
Following the manufacturer's schedule: frequent (quarterly) inspection (every 150 hours or 3 months); annual inspection (every year); replace drive hub oil (every 200 hours); grease steer yokes (earlier e-drive serials only) (every 100 hours); replace hydraulic filters (every 2,000 hours). We keep every machine in our fleet on this schedule.
Where can I find the Genie GS-1932 operator's manual?
The Genie GS-1932 operator's manual is linked on this page, along with the other manufacturer documents we keep for it.
Where can I buy a Genie GS-1932 in Utah?
Versi Rentals sells the Genie GS-1932 from our yard in Springville, Utah and shipping nationwide on sales. Call (801) 880-8800 or see the listings on this page.