Compact Telehandler
Genie GTH-5519 Compact Telehandler
A compact 5,500 lb telehandler, under 6 ft 6 in tall and 6 ft wide. It lifts to 18 ft 10 in and fits through gates and tight sites.
Genie GTH-5519 specifications
- Lift capacity
- 5,500 lb
- Lift height
- 18 ft 10 in
- Forward reach
- 11 ft 3 in
- Capacity at full reach
- 1,900 lb
- Capacity at max height
- 4,400 lb
- Machine weight
- 10,360 lb
- Width
- 5 ft 11 in
- Stowed height
- 6 ft 6 in
- Engine
- Deutz TD2.9 diesel, 74 hp, Tier 4 Final
- Fuel capacity
- 15.8 gal
- Travel speed
- 15 mph
From the manufacturer’s published specifications. Check the machine’s decals for its exact ratings.
Daily care
Before each shift, do the walk-around and check engine oil, hydraulic oil, coolant, tire pressure and DEF if equipped. Drain water from the fuel/water separator. Grease the boom wear pads every 8 hours or daily. Use only ultra-low-sulfur diesel.
Manuals and documents
- Operator's manualSerial GTH55M-11700 to GTH55M-21404 (our 2025 units GTH55M-19582 and 19646; likely our 2021 unit)
- Operator's manualSerial GTH55M-21405 and up
- Operator's manualSerial GTH55M-7009 to 11699
- Operator's manualSerial GTH5516M-5338 to GTH55M-7008
- Spec sheetGenie GTH-5519 Specifications (2022, North America)
Genie GTH-5519 at Versi Rentals
For sale from our yard, with shipping nationwide.
Versi Rentals
2017 Genie GTH-5519 Telehandler/Forklift
2,956 Hours · ID 7116
$44,900
Available
Versi Rentals
2021 Genie GTH-5519 Telehandler/Forklift
1,467 Hours · ID 2973
$49,900
Available
Versi Rentals
2025 New! *In Stock* Genie GTH-5519 5500 lbs 19' Reach Forklift Forklift/Telehandler (Id.9582)
$68,900
Available
Versi Rentals
2025 New! *In Stock* Genie GTH-5519 5500 lbs 19' Reach Forklift Forklift/Telehandler (Id.9646)
$68,900
Available
Versi Rentals
2025 New! Genie GTH-5519 Enclosed Cab A/C Forklift Telehandler
$79,900
Available
Versi Rentals
2026 New! Genie GTH-5519 Enclosed Cab Forklift Forklift/Telehandler 5500 lbs 19' Reach
$73,900
Available
Genie GTH-5519 maintenance schedule
The manufacturer’s preventive maintenance intervals, whichever comes first of hours or time. Every machine in our fleet is kept on this schedule.
- Pre-operation inspection and daily fluid checksBefore each shift
- First 50-hour service (one time, C-1/C-2)Once, after the first 50 hours
- First 150-hour service (one time, C-3)Once, after the first 150 hours
- Comer axle initial oil service (one time)Once: check/add at 100 hours, change at 200 hours
- Lubricate the boom wear pads (P0-1)Every 8 hours or day
- Grease the axles (Comer)Every 200 hours
- Check axle differential/planetary oil and clean breather (Comer)Every 300 hours
- Quarterly (frequent) inspectionEvery 3 months
- Deutz engine 250-hour serviceEvery 250 hours
- Engine oil and filterEvery 500 hours
- Engine air filter, fuel filter/separator and 500-hour checksEvery 500 hours
- Annual inspectionEvery year
- Engine 1000-hour service (P1-1)Every 1,000 hours
- Comer axle oil changeEvery 1,000 hours
- Test or replace hydraulic oilEvery 2,000 hours
- Replace V-rib belt and tensioning pulleyEvery 3,000 hours
Genie GTH-5519 questions
How high can the Genie GTH-5519 lift?
The Genie GTH-5519 lifts to 18 ft 10 in.
How much weight can the Genie GTH-5519 lift?
The Genie GTH-5519 is rated for 5,500 lb, and 1,900 lb at full reach.
How wide is the Genie GTH-5519?
The Genie GTH-5519 is 5 ft 11 in wide.
How much does the Genie GTH-5519 weigh?
The Genie GTH-5519 weighs 10,360 lb, which matters for trailers, floors, and elevators.
What daily care does the Genie GTH-5519 need?
Before each shift, do the walk-around and check engine oil, hydraulic oil, coolant, tire pressure and DEF if equipped. Drain water from the fuel/water separator. Grease the boom wear pads every 8 hours or daily. Use only ultra-low-sulfur diesel.
How often does the Genie GTH-5519 need service?
Following the manufacturer's schedule: lubricate the boom wear pads (p0-1) (every 8 hours or day); grease the axles (comer) (every 200 hours); check axle differential/planetary oil and clean breather (comer) (every 300 hours); quarterly (frequent) inspection (every 3 months); deutz engine 250-hour service (every 250 hours). We keep every machine in our fleet on this schedule.
Where can I find the Genie GTH-5519 operator's manual?
The Genie GTH-5519 operator's manual is linked on this page, along with the other manufacturer documents we keep for it.
Where can I buy a Genie GTH-5519 in Utah?
Versi Rentals sells the Genie GTH-5519 from our yard in Springville, Utah and shipping nationwide on sales. Call (801) 880-8800 or see the listings on this page.