Telehandler
Genie GTH-636 Telehandler
A compact 6,000 lb telehandler that lifts to 36 ft and reaches 21 ft 11 in forward. It's under 8 ft wide and has 4-wheel drive and 3 steering modes for tight jobsites.
Genie GTH-636 specifications
- Lift capacity
- 6,000 lb
- Lift height
- 36 ft
- Forward reach
- 21 ft 11 in
- Capacity at full reach
- 1,500 lb
- Capacity at max height
- 5,000 lb
- Machine weight
- 17,600 lb
- Width
- 7 ft 11 in
- Stowed height
- 7 ft 10 in
- Engine
- Deutz TD2.9 diesel, 74 hp, Tier 4 Final
- Fuel capacity
- 27 gal
- Travel speed
- 18 mph
From the manufacturer’s published specifications. Check the machine’s decals for its exact ratings.
Daily care
Before each shift, do the walk-around and check engine oil, hydraulic oil (sight gauge), coolant, transmission oil (engine idling and warm), tire pressure and DEF if equipped. Drain water from the fuel/water separator. Grease the boom wear pads every 8 hours or daily. Use only ultra-low-sulfur diesel.
Genie GTH-636 at Versi Rentals
For sale from our yard, with shipping nationwide.
Versi Rentals
2018 Genie GTH-636 Telehandler/Forklift
2,698 Hours · ID 1245
$49,900
Available
Versi Rentals
2018 Genie GTH-636 Telehandler/Forklift
2,804 Hours · ID 1765
$46,900
Available
Versi Rentals
2026 New! Genie GTH-636 Enclosed Cab Forklift Telehandler
$119,900
Available
Versi Rentals
2026 New! Genie GTH-636 Forklift Telehandler
$116,900
Available
Genie GTH-636 maintenance schedule
The manufacturer’s preventive maintenance intervals, whichever comes first of hours or time. Every machine in our fleet is kept on this schedule.
- Pre-operation inspection and daily fluid checksBefore each shift
- First 50-hour service (one time, C-1/C-2)Once, after the first 50 hours
- First 150-hour service (one time, C-3)Once, after the first 150 hours
- Initial axle and transmission oil change (one time)Once, at 100 hours
- Lubricate the boom wear pads (P0-1)Every 8 hours or day
- Grease axle king pins, trunnion bushings and sealsEvery week
- Check axle oil levels (all compartments)Every month
- Quarterly (frequent) inspection Q-1 to Q-12Every 3 months
- Deutz engine 250-hour serviceEvery 250 hours
- Engine oil and filterEvery 500 hours
- Engine air filter, fuel filter/separator and 500-hour checksEvery 500 hours
- Adjust axle negative and service brakesEvery 500 hours
- Annual inspection A-1 to A-6Every year
- Engine 1000-hour service (P1-1)Every 1,000 hours
- Transmission oil and filter, drop box oilEvery 1,000 hours
- Axle hub and differential oil changeEvery 1,000 hours
- Test or replace hydraulic oilEvery 2,000 hours
- Replace V-rib belt and tensioning pulleyEvery 3,000 hours
- Engine general overhaul (Deutz TD2.9)Every 5,000 hours
Genie GTH-636 questions
How high can the Genie GTH-636 lift?
The Genie GTH-636 lifts to 36 ft.
How much weight can the Genie GTH-636 lift?
The Genie GTH-636 is rated for 6,000 lb, and 1,500 lb at full reach.
How wide is the Genie GTH-636?
The Genie GTH-636 is 7 ft 11 in wide.
How much does the Genie GTH-636 weigh?
The Genie GTH-636 weighs 17,600 lb, which matters for trailers, floors, and elevators.
What daily care does the Genie GTH-636 need?
Before each shift, do the walk-around and check engine oil, hydraulic oil (sight gauge), coolant, transmission oil (engine idling and warm), tire pressure and DEF if equipped. Drain water from the fuel/water separator. Grease the boom wear pads every 8 hours or daily. Use only ultra-low-sulfur diesel.
How often does the Genie GTH-636 need service?
Following the manufacturer's schedule: lubricate the boom wear pads (p0-1) (every 8 hours or day); grease axle king pins, trunnion bushings and seals (every week); check axle oil levels (all compartments) (every month); quarterly (frequent) inspection q-1 to q-12 (every 3 months); deutz engine 250-hour service (every 250 hours). We keep every machine in our fleet on this schedule.
Where can I find the Genie GTH-636 operator's manual?
The Genie GTH-636 operator's manual is linked on this page, along with the other manufacturer documents we keep for it.
Where can I buy a Genie GTH-636 in Utah?
Versi Rentals sells the Genie GTH-636 from our yard in Springville, Utah and shipping nationwide on sales. Call (801) 880-8800 or see the listings on this page.