Telehandler
Genie GTH-844 Telehandler
An 8,000 lb telehandler that lifts to 43 ft 10 in and reaches 28 ft 2 in forward. It has full-time 4WD, 3 steering modes and ±10° frame leveling.
Genie GTH-844 specifications
- Lift capacity
- 8,000 lb
- Lift height
- 43 ft 10 in
- Forward reach
- 28 ft 2 in
- Capacity at full reach
- 2,000 lb
- Capacity at max height
- 6,000 lb
- Machine weight
- 22,600 lb
- Width
- 8 ft 1.5 in
- Stowed height
- 7 ft 10 in
- Engine
- Deutz TCD3.6 diesel, 74 hp, Tier 4 Final
- Fuel capacity
- 32 gal
- Travel speed
- 15 mph
From the manufacturer’s published specifications. Check the machine’s decals for its exact ratings.
Daily care
Before each shift, do the walk-around and check engine oil, hydraulic oil (sight gauge), coolant, transmission oil (engine idling and warm), tire pressure (72 psi on air tires) and DEF if equipped. Drain water from the fuel/water separator. Grease the boom wear pads every 8 hours or daily. Use only ultra-low-sulfur diesel.
Manuals and documents
- Operator's manualSerial GTH08E-13522 and up, and GTH08T-14101 and up (our 2024-2026 units, e.g. GTH08T-15728)
- Operator's manualSerial GTH08E-11500 to GTH08E-13521
- Operator's manualSerial GTH0813-16606 to GTH0816-21535, excluding 15-21425, 15-21457 and 16-21516 (2013-2016; our 2013/2014 units)
- Spec sheetGenie GTH-844 Specifications (2022, North America)
Genie GTH-844 at Versi Rentals
For sale from our yard, with shipping nationwide.
Versi Rentals
2013 Genie GTH-844 Telehandler/Forklift
5846 Hours · ID 7464
$39,900
Available
Versi Rentals
2014 Genie GTH-844 Telehandler/Forklift
2,001 Hours · ID 9937
$49,900
Available
Versi Rentals
2018 Genie GTH-844 Telehandler/Forklift
2,537 Hours · ID 2079
$56,900
Available
Versi Rentals
2018 Genie GTH-844 Telehandler/Forklift
3,681 Hours · ID 2028
$57,900
Available
Versi Rentals
2024 Genie GTH-844D Forklift Forklift/Telehandler 8,000 lbs 44' (id.5302)
$107,900
Available
Versi Rentals
2024 Genie GTH-844D Forklift Telehandler *Warranty* (id.5384)
$109,900
Available
Versi Rentals
2025 NEW Genie GTH-844 – IN STOCK – SPECIAL BUY – $115,900
$115,900
Available
Versi Rentals
2026 New! Genie GTH-844D Forklift Forklift/Telehandler 8,000 lbs 44' Reach
$129,900
Available
Genie GTH-844 maintenance schedule
The manufacturer’s preventive maintenance intervals, whichever comes first of hours or time. Every machine in our fleet is kept on this schedule.
- Pre-operation inspection and daily fluid checksBefore each shift
- First 50-hour service (one time, C-1/C-2)Once, after the first 50 hours
- First 150-hour service (one time, C-3)Once, after the first 150 hours
- Initial axle and transmission oil change (one time)Once, at 100 hours
- Lubricate the boom wear pads (P0-1)Every 8 hours or day
- Grease axle king pins, trunnion bushings and sealsEvery week
- Check axle oil levels (all compartments)Every month
- Quarterly (frequent) inspection Q-1 to Q-12Every 3 months
- Deutz engine 250-hour serviceEvery 250 hours
- Engine oil and filterEvery 500 hours
- Engine air filter, fuel filter/separator and 500-hour checksEvery 500 hours
- Adjust axle negative and service brakesEvery 500 hours
- Annual inspection A-1 to A-6Every year
- Engine 1000-hour service (P1-1)Every 1,000 hours
- Transmission oil and filter, drop box oilEvery 1,000 hours
- Axle hub and differential oil changeEvery 1,000 hours
- Test or replace hydraulic oilEvery 2,000 hours
- Replace V-rib belt and tensioning pulleyEvery 3,000 hours
- Engine general overhaul (Deutz TCD3.6)Every 6,000 hours
Genie GTH-844 questions
How high can the Genie GTH-844 lift?
The Genie GTH-844 lifts to 43 ft 10 in.
How much weight can the Genie GTH-844 lift?
The Genie GTH-844 is rated for 8,000 lb, and 2,000 lb at full reach.
How wide is the Genie GTH-844?
The Genie GTH-844 is 8 ft 1.5 in wide.
How much does the Genie GTH-844 weigh?
The Genie GTH-844 weighs 22,600 lb, which matters for trailers, floors, and elevators.
What daily care does the Genie GTH-844 need?
Before each shift, do the walk-around and check engine oil, hydraulic oil (sight gauge), coolant, transmission oil (engine idling and warm), tire pressure (72 psi on air tires) and DEF if equipped. Drain water from the fuel/water separator. Grease the boom wear pads every 8 hours or daily. Use only ultra-low-sulfur diesel.
How often does the Genie GTH-844 need service?
Following the manufacturer's schedule: lubricate the boom wear pads (p0-1) (every 8 hours or day); grease axle king pins, trunnion bushings and seals (every week); check axle oil levels (all compartments) (every month); quarterly (frequent) inspection q-1 to q-12 (every 3 months); deutz engine 250-hour service (every 250 hours). We keep every machine in our fleet on this schedule.
Where can I find the Genie GTH-844 operator's manual?
The Genie GTH-844 operator's manual is linked on this page, along with the other manufacturer documents we keep for it.
Where can I buy a Genie GTH-844 in Utah?
Versi Rentals sells the Genie GTH-844 from our yard in Springville, Utah and shipping nationwide on sales. Call (801) 880-8800 or see the listings on this page.