Articulating Boom Lift
Genie Z-45 XC Articulating Boom Lift
A 45 ft 6 in platform (51 ft 6 in working height) articulating boom with 24 ft 5 in of up-and-over clearance. Its dual capacity is 1,000 lb restricted or 660 lb unrestricted, and it has four-wheel drive, 45% gradeability and zero tailswing.
Genie Z-45 XC specifications
- Working height
- 51 ft 6 in
- Platform height
- 45 ft 6 in
- Horizontal reach
- 24 ft 9 in (24 ft 5 in up-and-over clearance)
- Platform capacity
- 660 lb unrestricted / 1,000 lb restricted
- Platform size
- 6 ft x 2 ft 6 in
- Stowed width
- 7 ft 6 in
- Stowed height
- 7 ft 4 in
- Machine weight
- 16,360 lb (4WD)
- Drive speed
- 4.5 mph stowed
- Gradeability
- 45% (4WD, stowed)
- Power
- 49 hp Deutz D2.9 L4 diesel Tier 4f (Ford dual-fuel and Perkins options); 17 gal fuel tank, 22 gal hydraulic tank
From the manufacturer’s published specifications. Check the machine’s decals for its exact ratings.
Daily care
Before each shift check engine oil, hydraulic oil, coolant, fuel and DEF if equipped, and do the walk-around and function tests in the operator's manual. Watch the platform load: 660 lb in the outreach zone, 1,000 lb only in the restricted zone. Always wear a harness and lanyard. If the machine has been parked for more than 3 months, it needs a quarterly inspection before use.
Genie Z-45 XC at Versi Rentals
For sale from our yard, with shipping nationwide.
Genie Z-45 XC maintenance schedule
The manufacturer’s preventive maintenance intervals, whichever comes first of hours or time. Every machine in our fleet is kept on this schedule.
- Pre-operation inspection and function testsBefore each shift
- Frequent (quarterly) inspectionEvery 150 hours or 3 months
- Annual inspectionEvery year
- Engine air filter, fuel filter/separator, valve clearance (Deutz D2.9 L4)Every 500 hours
- Engine oil and filter (Deutz D2.9 L4)Every 1,000 hours
- Replace drive hub oilEvery 1,000 hours
- Replace hydraulic filtersEvery 2,000 hours
- Test or replace hydraulic oilEvery 2,000 hours
- Check boom wear padsEvery 2,000 hours
Genie Z-45 XC questions
How high does the Genie Z-45 XC reach?
The Genie Z-45 XC has a working height of 51 ft 6 in and a platform height of 45 ft 6 in.
How much weight can the Genie Z-45 XC lift?
The Genie Z-45 XC is rated for 660 lb unrestricted / 1,000 lb restricted.
How wide is the Genie Z-45 XC?
The Genie Z-45 XC is 7 ft 6 in wide when stowed.
How much does the Genie Z-45 XC weigh?
The Genie Z-45 XC weighs 16,360 lb (4WD), which matters for trailers, floors, and elevators.
What daily care does the Genie Z-45 XC need?
Before each shift check engine oil, hydraulic oil, coolant, fuel and DEF if equipped, and do the walk-around and function tests in the operator's manual. Watch the platform load: 660 lb in the outreach zone, 1,000 lb only in the restricted zone. Always wear a harness and lanyard. If the machine has been parked for more than 3 months, it needs a quarterly inspection before use.
How often does the Genie Z-45 XC need service?
Following the manufacturer's schedule: frequent (quarterly) inspection (every 150 hours or 3 months); annual inspection (every year); engine air filter, fuel filter/separator, valve clearance (deutz d2.9 l4) (every 500 hours); engine oil and filter (deutz d2.9 l4) (every 1,000 hours); replace drive hub oil (every 1,000 hours). We keep every machine in our fleet on this schedule.
Where can I find the Genie Z-45 XC operator's manual?
The Genie Z-45 XC operator's manual is linked on this page, along with the other manufacturer documents we keep for it.
Where can I buy a Genie Z-45 XC in Utah?
Versi Rentals sells the Genie Z-45 XC from our yard in Springville, Utah and shipping nationwide on sales. Call (801) 880-8800 or see the listings on this page.