Telehandler
SkyTrak 8042 Telehandler
An 8,000 lb, 42 ft telehandler with full-time 4-wheel drive and 3 steering modes, for heavy material placement on commercial job sites.
SkyTrak 8042 specifications
- Lift capacity
- 8,000 lb
- Lift height
- 41 ft 11 in
- Forward reach
- 26 ft 7 in
- Capacity at full reach
- 2,200 lb
- Machine weight
- 27,100 lb
- Engine
- Cummins QSB3.3 turbo diesel: 100 hp Tier 4i (ULS) or 110 hp Tier 3 (LS), no DEF, on S/N 0160045250-0160069719 (likely our 2014 unit); later units have the Cummi
- Fuel capacity
- 35.6 gal
- Travel speed
- 19.9 mph (4-speed powershift)
From the manufacturer’s published specifications. Check the machine’s decals for its exact ratings.
Daily care
Every 10 hours (each day of use): check fuel, drain the fuel/water separator, check the air filter restriction indicator, engine oil, coolant, hydraulic and transmission oil levels, and tire condition and pressure. Grease the 50-hour points, check the boom wear pads and the battery every 50 hours. Engine oil and filter and the air filter elements are changed every 250 hours.
SkyTrak 8042 at Versi Rentals
Rent by the day, week, or month from our Springville yard, with delivery throughout Utah. Some are also for sale.
SkyTrak 8042 maintenance schedule
The manufacturer’s preventive maintenance intervals, whichever comes first of hours or time. Every machine in our fleet is kept on this schedule.
- First 50 hours (new machine or new component)Once, at the first 50 hours
- First axle and wheel-end oil changeOnce, at the first 500 hours
- 10-hour checksEvery 10 hours
- 50-hour service and lubricationEvery 50 hours
- Engine oil and filter, air filter elements (250-hour service)Every 250 hours
- Fuel filters and lug nut torque (500-hour service)Every 500 hours
- Hydraulic, transmission and axle oils (1000-hour service)Every 1,000 hours
- Crankcase vent filter (ULS engines)Every 1,500 hours
- Engine coolant and valve lash (2000-hour service)Every 2,000 hours
SkyTrak 8042 questions
How high can the SkyTrak 8042 lift?
The SkyTrak 8042 lifts to 41 ft 11 in.
How much weight can the SkyTrak 8042 lift?
The SkyTrak 8042 is rated for 8,000 lb, and 2,200 lb at full reach.
How much does the SkyTrak 8042 weigh?
The SkyTrak 8042 weighs 27,100 lb, which matters for trailers, floors, and elevators.
What daily care does the SkyTrak 8042 need?
Every 10 hours (each day of use): check fuel, drain the fuel/water separator, check the air filter restriction indicator, engine oil, coolant, hydraulic and transmission oil levels, and tire condition and pressure. Grease the 50-hour points, check the boom wear pads and the battery every 50 hours. Engine oil and filter and the air filter elements are changed every 250 hours.
How often does the SkyTrak 8042 need service?
Following the manufacturer's schedule: 10-hour checks (every 10 hours); 50-hour service and lubrication (every 50 hours); engine oil and filter, air filter elements (250-hour service) (every 250 hours); fuel filters and lug nut torque (500-hour service) (every 500 hours); hydraulic, transmission and axle oils (1000-hour service) (every 1,000 hours). We keep every machine in our fleet on this schedule.
Where can I rent or buy a SkyTrak 8042 in Utah?
Versi Rentals rents and sells the SkyTrak 8042 from our yard in Springville, Utah, with delivery throughout Utah and shipping nationwide on sales. Call (801) 880-8800 or see the listings on this page.